Bahama Style Fixed Louver Shutters with 1-5/8" x 3/8" Louvers 
- Heavier construction for functional hinging from top.
- Center sub-stile allows extra wide panels up to 60" wide x 102" long.
- Panels over 65" long should also have a sub-rail as recommended.
SEE Bahama Shutter Hardware section for specialty hinging and struts / push rods to hold panels out at the bottom.
The Bahama style shutter is a 2" x 1 3/8" Recessed Stile & Rail Heavy-Duty shutter with a center sub-stile allowing a double wide panel to hang from top of window. This distinctly designed shutter opens from a horizontal angle, providing protection from the sun while permitting maximum airflow.
The Bahama Shutter is an exceptional addition to home exteriors throughout all geographic areas. When you desire a unique shutter with crisp, clean lines, the Bahama Shutter has much to offer.
To meet your needs, our Western Red Cedar wood Bahama Shutters are available with custom measurements, including width, height and inch fraction.
 |
(above)
Heavy Duty Fixed Louver Shutter w/ Substile (Flush-sanded) |
Heavy Duty Fixed Louver Spandrel with 3 substiles.
(Flush-sanded) |
1-3/8" Heavy Duty Louver Bahama Style Shutter with substile and subrail.
(Flush-sanded) |
Double Section Bahama Style Heavy Duty Shutter Specifications
| Maximum Width with one sub-stile |
60" * |
| Maximum Shutter Length: |
102" * |
| Side Stiles: |
2" x 1-3/8" |
| Top Rail: |
4" x 1-3/16" |
| Center Rail: |
3" x 1-3/16" |
| Bottom Rail: |
4" x 1-3/16" |
| Louver: |
1-5/8" x 3/8" |
| * Larger sizes available by Special Custom Order. |
WESTERN RED CEDAR
Our choice material. Naturally decay resistant, light weight, straight and it has the lowest expansion ratio of any species. The tight grain of old growth Western red is unmatched. FSC certified sustainable.
CUSTOM OPTIONS
Heavy Duty Recessed Stile & Rail Louvered Shutters may be ordered in custom configurations pictured here, illustrated below or created and built to your specifications.
(Additional charges may apply.)
EXTERIOR SHUTTER FINISHING OPTIONS
(Additional charges apply.)
Option 1: Spray Primed.
Each shutter is sanded and sprayed with a quality oil-based primer. Additional light sanding is required prior to finishing.
Option 2: Primed and Finished*
Each shutter is sanded, primed with two coats of oil-based primer and sanded again. Then the shutters are finished with a top quality exterior paint of your choice.
*All color finishes may be matched to your national brand of paint by supplying the manufacturer's name and color number or code.
1 3/8" Bahama style, Heavy Duty Shutter Pricing
SHUTTER PRICING:
PER EACH DOUBLE SECTION BAHAMA STYLE PANEL -
Prices include Shipping & Handling.
Important:
BAHAMA/SPANDREL SHUTTERS:
Price = Per Pair Width Price plus $100.00 design fee .
Priced per each includes one substile; extra substile add $50.00.
Example:
A 48" wide Bahama = use 24" wide pair price PLUS $100.00 Bahama DESIGN fee.
MAXIMUM WIDTH: 60 "
AVAILABLE HEIGHTS: 20" to 102"
Shutters may be ordered to the nearest 1/8": Example: 14-7/8"w x 56-3/4"h
AVAILABLE LOUVERS:Thickness 3/8"; Widths 1-5/8" on 1 3/8" spacing
Bahama shutters constructed flush-sanded.
For additional shutter sizes call for quote.
Shutters are constructed with two equal sections in width and/or height, unless otherwise specified.
For shutter heights over 65", two section (upper and lower) construction is highly recommended.
Prices are for CLEAR (no fingerjoints) Western Red Cedar; for select grain STAIN-GRADE with no filler add 10%.
Pricing below includes Shipping & Handling in the Continental US
For orders less than $500, add 10% small order fee.
Pricing below is for INDIVIDUAL BAHAMA PANEL, NOT PAIRS.
Example: If you want a Bahama Shutter 40"x56”. Divide the width in half (20") to find the correct size and add $100. In this case 20x56” at $392 plus $100 design fee.
Receive one Bahama panel 40x56 for $492. Then add Priming or Painting option.
| HEIGHT |
SHUTTER WIDTHS (Use half desired Bahama style width)
PLUS $100 design fee that you must add.
|
Finish Options
Your painter will
love you. |
| 10" to 14" |
14" to 18" |
18" to 22" |
22" to 26" |
26" to 30" |
SPRAY
PRIMED |
PRIMED AND
FINISHED |
| PLUS $100 design fee that you must add. |
20" to 36"
36" to 42"
42" to 48" |
178.69
198.48
218.27
|
224.08
247.55
271.02 |
279.93
307.97
336.01 |
336.24
368.72
401.20 |
391.20
427.87
464.53 |
ADD $60.00 |
ADD
$165.00 |
| PLUS $100 design fee that you must add. |
48" to 54"
54" to 60"
60" to 66"
66" to 72"
72" to 78" |
233.86
253.30
272.74
292.19
311.63 |
294.49
317.96
341.43
364.90
388.37 |
364.05
392.09
420.13
448.17
476.21 |
433.68
466.16
498.64
531.12
563.59 |
501.19
537.86
574.52
611.19
647.85 |
ADD $60.00 |
ADD
$217.00 |
| PLUS $100 design fee that you must add. |
78" to 84"
84" to 90"
90" to 96"
96" to 102" |
331.07
331.14
369.88
389.32 |
411.84
435.31
458.78
482.25 |
504.25
532.29
560.34
588.38 |
596.07
628.55
661.03
693.51 |
684.52
721.18
757.84
794.51 |
ADD $60.00 |
ADD
$292.00 |
CUSTOM SHUTTER OPTIONS
Custom Option Charges are in addition to base shutter price and finishing charges. (Priced per pair.)
| CUSTOM OPTION |
ADDITIONAL
CHARGE |
|
Additional Wood Species . . . . . . . . . . . . . . . . . . . .
BAHAMA STYLE DESIGN FEE
Copper Capping . . . .(Recommended) . . . . . . . . . .
Custom Paint Color (on orders less than 60 sq. ft.)
Rail Width Modification . . . . . . . . . . . . . . . . . . . . .
Stile Width Modification . . . . . . . . . . . . . . . . . . . . |
quote
$100.00
$51.00
$30.00
$50.00
$50.00 |
 |
BAHAMA STYLE SHUTTER HARDWARE OPTIONS
The standard Bahama hardware kits include the hinges, pintels & pushrods. However, the Bahama hinge is like a "piano" hinge and does not require pintels.
HOT ROLL STEEL
WITH BLACK POWDER COAT |
2 "L" Hinges & 2 Push Rods
- includes a set of Plate Pintels |
$120.00 |
 |
2 Mid-Hinges & 2 Push Rods
- includes a set of Plate Pintels |
$120.00 |
 |
 |
STAMPED STEEL
WITH GALVANIZED or BLACK POWDER COAT |
| 2 black hinges with pintels and 2 push rods |
$95.00 |
|
2 galanized hinges with pintels and 2 push rods |
$95.00 |
 |
(recommended for painting shutter/house color)
 |
CAST IRON
WITH BLACK POWDER COAT BAHAMA HINGE |
| Flat/Lintel hinge & 2 push rods |
$120.00 |
|
Build-out hinge & 2 push rods |
$120.00 |
 |
 |
Miscellaneous |
 |
 |
 |
 |
| 2. 4" Lag Pintel |
5. Strap Hinge |
8. "S" Holdback & Latch |
16. Aesthetic
Mount Kit |
| |
|
|
|
Mounting Hardware & Accessory Pricing
See the Pricing PDF for pricing,
size and material options.
If you don't have Adobe Reader,
click here to get it.
Want a bid for our Exterior Shutters?
If you'd like a bid for exterior wood shutters & have a digital camera,
why not email us for pricing?
- Take a picture of your home "from the street".
- Take a picture of each window to get shutters.
- If you already have shutters, take a picture of one of those too.
- Measure the appoximate height of each window "recess" to include all window trim.
- Measure the approximate width to include all window trim.
It's that simple.
You can email an initial inquiry to mgt@thewoodworksinc.com
Be sure to include your city, state, zip.
Include in your Subject Line EXT WOOD SHUTTER INQUIRY.
If you have questions, call us at 913-362-2432
