Press Cane Styles and Sizes Shown

Prewoven cane comes in sheets that are cut to larger than needed and then pressed into a slot in the wood of the chair or rocker.

The standard pattern 98% of time is 7/16" W902 style based on size. It is the one on the top right below.

Many other sizes and woven styles are available, usually with time delay to obtain supplies and some additional cost. We replace them all.

(Sorry, we do NOT sell the caning itself or supplies. We DO recaning as a service. IF you want to try it yourself, which we do not recommend, seek your supplies by entering "Chair Caning Supplies" in any Internet browser and mail order what you need. Good Luck! )

or

Go to Caning Replacement Pak & Ship and learn how to carton and ship your chair to us to recane properly and we'll even pay return shipping!

W903- 3/8” Open Mesh	W902- 7/16” Open Mesh - STANDARD
W901- 1/2” Open Mesh	W904- 5/8” Open Mesh Width: 24” only
W905- 3/4” Open Mesh Width: 24” only	W906- 1” Open Mesh Width: 24” only
W908- 5/8” Open Mesh - Special Width: 24” only	W612- Herrinbone Reed Width : 24” only
W700- Radio Weave - Fine Width: 18” & 24” only	W701- Radio Weave - Med Width: 24” only
W500- Danish Weave Width: 24” only	W501- Danish Weave Med
W610- Half-Round Reed Weave With: 24” & 36”	W600- Reed Weave med (reed on both sides)
W601- Close Weave Med	W602- Close Weave Superfine Width: 24” only
W603-1 Close Weave 5x5 Width: 24” only	W609- Diamond Weave Width: 18” only
W550- Diamond Weave Availability of this pattern is questioinable	W570-Star Weave This pattern is no longer available from any of our sources

The entire website/s of www.TheWoodWorksInc.com and www.TheWWs.com and www.TheMovingClaims.com are copyrighted and should not be used by others in the trade in any form without explicit written permission.