Kitchen Plastic Cabinet Drawer Replacement Solutions

Plastic Kitchen Drawers Gone Bad?   We Have a Solution!

NEW QUALITY WOOD DRAWER BOX AND NEW FULL EXTENSION SLIDES,
ALL FOR $100 WITH FREE SHIPPING. A LITTLE HANDY WORK INSTALLING AND YOU HAVE A SUPERB SOLUTION.

Armstrong or Triangle Pacific kitchen plastic drawer replacement options in quality wood, dovetailed construction. Prefinished with replacement track system. Easy to install.

We have not found original type plastic drawers available anywhere; BUT, we have an option.

 

NEW WOOD DRAWER BOX INTERNET SPECIAL $60

Replace 1 or all cabinet drawers with new Birch plywood dovetailed pre-finished, or add pull-out trays. Bring in your sample, requirements, or email sizes. FREE shipping Nationwide!

BALTIC PLYWOOD CUSTOM CABINET QUALITY DRAWER BOXES

INTERNET SPECIAL: $60 EACH FOR 95%
OF STANDARD "UNDER COUNTER" KITCHEN DRAWER SIZES.

The typical cost for the new STANDARD DRAWER BOX is $60 each.
The new box includes a clear lacquer pre-finish and arrives preassembled with dovetailed joints with FREE SHIPPING.

INTERNET SPECIAL any "under counter" standard drawer height box height of 2 1/2", 3", 3 1/2", or 4" and up to 24" wide for under counter drawers.
Standard box front/back depth is 21" or 18" with options available.
Slightly more for larger or deeper requirements.
Plastic drawers are 18" rated.

Box Standard Height: 2 1/2", 3", 3 1/2", 4" and taller with upcharge
Add $10 for Special taller heights are limited to 5, 6, 7, 8, 9, 9.5, 10

Non Standard Special Drawer Box: any size over 5 " high or 24" wide.
Add $10 for extra height. Special taller heights are limited to 5, 6, 7, 8, 9, 9.5, 10
Add $10 for extra width.
Add $20 for 1/2" bottom to support heavy contents any size.

Add $10 Rollout Box for Pull-out Trays:
A cabinet pull-out tray is the same drawer box with no cabinet drawer face and with the box front having the handle scoop out area.

Add $20 High Back Rollout for Special Pantry Pull Out Trays:
High Back Trays are basically no different, but are usually much larger, longer, or wider than kitchen drawers to keep taller items from tipping over the back. Extra wide charges also apply for over 24".
Order back height desired UP TO 5" and the front is always 2 1/2"

½” THICK BACK, FRONT & SIDES WITH ¼” BOTTOMS (recessed 1/2")
DOVETAILED, ASSEMBLED AND CLEAR UV FINISHED
In Heights listed by up to Width in 1/8” and Front/Back Depth in 1/8”.

Just transfer your drawer front and slide hardware and the drawer is better than new.

• Sizing: Requires client to accurately measure  (WE MUST STRESS ACCURATELY!) width and height of cabinet opening to narrowest +/-1/16" accuracy.
  WE MUST STRESS YOU HAVE TO CONFIRM THAT YOU ARE PROVIDING THE CABINET OPENING. IF SO, WE'LL RESIZE FOR ALLOWANCES FOR OUR SLIDE SYSTEM.

   

INCLUDE DELUXE FULL EXTENSION SLIDES WITH YOUR NEW BOXES: INTERNET SPECIAL $40 WITH THE DRAWER

See our new special full extension metal slide system to support these drawers. Why not replace it all?

$40 per slide system set when ordered with $60 box with FREE SHIPPING.

SLIDE SYSTEM FOR NEW WOOD KITCHEN DRAWER BOXES 

This link will show you how easy it is to install with step-by-step instructions.

With our deluxe full exension bottom mount slide system, the actual drawer box has to be at least 1 " less than cabinet opening height for track clearance, and will be 5/8" narrower than cabinet opening.

After a thorough review of all kinds of slide systems, this style was chosen as the most easy to retro install.

• Available in 21" length for 24" kitchen cabinets and 18" for 21" vanities.
• Undermount Heavy Duty Soft Close Drawer Glides
• Rated For Up To 175lbs
• Soft Close Feature Makes It Impossible For The Drawer To Slam
  
• Comes with Drawer Mount Clips installed on drawer
• Comes with Rear Adjustable Mounting Bracket
• Available exculsively for 23-24" deep standard kitchen cabinets
• All for full extension of drawer box for FULL access.

HOW TO ORDER: IT IS SIMPLE!

Our products and services are NOT like ordering a widget from a fix catalog using a "shopping cart program", so we have found it advisable to use this approach for your safety as well as ours.

Email web@thewoodworksinc.com with what you want and ask any specific questions.
    MAKE IT EASY! Use the "EMAIL US" button on top of this and every page.

OPTION #1: send us a narrative email of what you want.

FOR PLASTIC DRAWER REPLACEMENT USING OUR SLIDE SYSTEM YOU DO NOT HAVE TO WORRY ABOUT SIZES OF THE PLASTIC DRAWER.

GIVE US ACCURATE CABINET OPENING WIDTH (DOUBLE CHECK) AND HEIGHT AND CONFIRM YOUR CABINETS ARE STANDARD 23/24' DEEP. PROVIDE QUANTITY PER OPENING SIZE.,

GIVE US THE INFORMATION LISTED IN THE "COPY AND PASTE" FORM BELOW.

STATE CLEARLY WHETHER YOU ARE GIVING DESIRED BOX ACTUAL SIZES BECAUSE YOU ARE TRYING TO REUSE YOUR EXISTING "T" TRACK WITH OUR "KIT", OR, CABIENT OPENING SIZES FROM WHICH WE'LL CALCULATE ACTUAL BOX SIZE FOR OUR DELUXE SLIDE SYSTEM.

Provide your UPS delivery address and delivery day time phone number. WARNING: your shipment's name and address MUST agree with your credit card to be used. Don't say to ship to Tom Jones when credit card used says Thomas Jones.

We will confirm what you want and final pricing by return email.

 

OPTION #2: using this "copy and paste form" send us an email of what you want.

WHAT TO SPECIFY OF CHOICES AVAILABLE:

NOTE: YOU CAN DRAG "FROM HERE" DOWN "TO HERE", COPY AND PASTE THIS ORDER FORM INTO YOUR BROWSER'S EMAIL, FILL IT OUT, AND EMAIL IT TO US AT web@thewoodworksinc.com

You will be sent a email Money Request Invoice for payment by your favorite credit card.

Normally ship in about 10 business days.

 

 

DRAG FROM HERE:

YOUR INFORMATION:
Company Name
Your Name
Email Address
Address
City/State/Zip
Day Phone #

 

DRAWER BOX SPECIFICATIONS:
DRAWER BOX TYPE
Drawer Box	yes
Roll Out Tray
High Back Rollout
PRE ASSEMBLED
Dovetailed	Yes
WOOD SPECIES
1/2" Baltic Birch	Yes
Pre Finished Clear
UV Coated	Yes
NOTCH FOR SLIDE
Bottom Mount	Yes
INCLUDE SLIDE w/ REAR BRACKETS
Full Extension	Yes
BOTTOM THICKNESS OPTION
1/4" Presumed	Yes
1/2" for Strength

 

DOVETAIL DRAWER BOX REQUIREMENTS WITH OUR SLIDE SYSTEM
		DON'T CONFUSE SEQUENCE
GIVE CABINET OPENING SIZES	Box High 2 2.5 3 3.5 4 Special 5 6 7 8 9 9.5 10	Box Depth with Slide 17 7/8 or 20 7/8		Price with Options
QUANTITY	Cabinet Opening Height (we'll resize to 1"+less)	BOX DEPTH Front/Back	Cabinet Opening WIDTH (we'll resize 5/8" for Slide Allowance)	Stand- ard Box	Roll Out Tray	High Back Tray	Extra High 5"+	Extra Wide 24"+	1/2" Bottom	TOTAL PER LINE
Example: 1	5	20 7/8	15	$60	$10	$20	$10	$10	$20
										$
										$
										$
										$
										$
										$
TOTAL DRAWER COST, FREE SHIPPING FOR 3 OR MORE										$$
UPS SHIPPING IF 1 OR 2 DRAWERS										$30

 

SLIDE SYSTEM REQUIREMENTS: Cabinet Opening less 5/8" for this slide
Full Extension, Bottom Mount, 21" reach or 18", Front Clips pre-installed and with Rear Clips, Easiest to Install
QUANTITY	18" or 21"	$40/SET	TOTAL
			$
			$
FREE SHIPPING WITH DRAWERS			$

 

DOVETAIL DRAWER BOX REQUIREMENTS WITH-OUT- OUR SLIDE SYSTEM
	DON'T CONFUSE SEQUENCE
GIVE ACTUAL BOX SIZES WANTED	Choose 2 2.5 3 3.5 4 Special 5 6 7 8 9 9.5 10	Usually 18 or 21"		Price with Options
QUANTITY	Existing Box Height	BOX DEPTH Front/Back	Existing Box Width	Stan- ard Box	Roll Out Tray	High Back Tray	Extra High 5"+	Extra Wide 24"+	1/2" Bottom	TOTAL PER LINE
Example: 1	4	18	14 1/2	$60	$10	$20	$10	$10	$20
										$
										$
										$
										$
										$
										$
TOTAL DRAWER COST, FREE SHIPPING FOR 3 OR MORE										$$
UPS SHIPPING IF 1 OR 2 DRAWERS										$30

 

DRAG DOWN TO HERE, copy and paste into your email browser.

 

SPECIAL NOTICES:

WOOD SPECIE NOTICE: BALTIC BIRCH is 1/2" thick of solid lumber plys with no voids and is the superior form of plywood. Dovetail construction assembled. Prefinished clear. Ready out of the shipping carton.

PAYMENT: We will confirm what you want and final pricing by return email.

For Easy Payment We Accept major credit cards using:
This means you advise us what you want, from our experience we clarify any aspects, we then SEND you a Money Request email for the confirmed proper amount. You then can pay with any of the above cards.

ORDER FEE WITH FREE SHIPPING: NO fee for orders of 3 or more drawers with or without slides.
No minimum order but there is a $30 packaging and handling fee PER ORDER for less than 3 drawer boxes.
FREE SHIPPING to the 48 Contigous States.

SHIPPING: Your order will 99% of time be turned over to UPS for shipment direct to you within 7-10 business days.

 

OPTION: $60 EACH FOR 1/2" BALTIC BIRCH PLYWOOD DOVETAILED PREASSEMBLED PREFINISHED and DELIVERED, PER YOUR SIZES, -BUT- WITHOUT SLIDE SYSTEM -BUT- WITH OUR "KIT" $20

PLASTIC DRAWER REPLACEMENT with “KIT”: $80

• Cabinet Quality Drawer Box of 1/2" Baltic Birch, preassembled and prefinished.
  
  • Drawer $60 drawer box
    plus $20 "Kit" hardware or $80 total to RE-USE your existing center track system, but we can't guarantee it will work because of such a variety of tracks that seem to exist.
  • Kit includes plastic "C" clip for fitting to back of wood drawer to use with existing track, and pair of wheels for front for drawer to roll on.
  • One drawer minimum.
  • ANY SIZE UP TO 5" HIGH AND 24" WIDE
  • Specify your required measurements of boxes (not openings) needed
    

IF YOU ARE TRYING TO RETROFIT OUR WOOD BOXES TO YOUR PLASTIC T SLIDE TRACK:

• Be sure your track still inside cabinet is in good shape.
• Your existing track has a width of NORMALLY 3/4". IF 1" we need to know what it actually is.
• We encourage you to remove the track in order to get accurate measurements.
• New drawer will be 18" deep front/back, same as plastic ones.
• The back of the wood drawer receives a specialty sized drawer track clip that can be used with the pre-existing plastic track still inside the cabinet. $10 per clip with screws.  Part of Kit. Miinimum of 3 such kits if ordered by themselves.
• We now supply the pair of wheels for mounting inside the front face frame for $10 per pair.   Part of the $20 kit. We no longer supply the brown nylon "L" glides for the inside of the cabinet face frame left & right for drawer to slide on. The wheels are better. Miinimum of 3 such kits if ordered by themselves.
• IF client has more than one plastic drawer, and one fails, it is strongly recommended they replace all that are used much since the rest will likely fail shortly. Plastic ages.
• Easy enough to install but clumsy. At most we advise readjustment of height of back glide might be required to get the drawer box to hang level.
• Drawer front and handle transfer and alignment is up to the client. Generally center left/right and up/down. Drill holes thru front of new box and attach actual drawer front with screws from behind. If you have a handle, then drill thru the old front thru the box and install the handle with a longer bolt.
• Any slide system hardware consumes space. If you want to convert to a metal side roller then you must advise us AND then provide the size of the actual box you need.
• IF you do not have the plastic track above the existing plastic drawer, you must advise us.
• IF you have a wheel on the back of the plastic drawer, you must advise us. We can not supply an alternative to the wheel structure.

broken plastic drawer	new wood drawer retro sized
nylon glide mounted to wood drawer back top center. Pre-drill wood box for clip screws. Only adjustment may be up or down for front alignment.	Deluxe face frame front rollers. $10 per pair optional.

 

JUST FOR YOUR INFORMATION ABOUT PLASTIC DRAWERS:

WE DO -NOT- SUPPLY PLASTIC DRAWERS & KNOW OF NO SOURCE FOR THEM.

The entire website/s of www.TheWoodWorksInc.com and www.TheWWs.com and www.TheMovingClaims.com are copyrighted and should not be used by others in the trade in any form without explicit written permission.